Specifications:

Reception Channels:VHF CH2~13
UHF Ch14~62
Booster Gain:24dB
Operating Voltage:11V DC-14.8V DC
Output Impedance:75 ohm
Cable Length:12 feet
G.W:0.4kg

Installation:
1. Determin the position to install the antenna adn clean the glass of the window on which the antenna will be attached,by removing humidity,dust and other debree which may cause poor adhesion or possible detachment of antenna elements.
2.Peel the little sticker s off from both sides of the two film elements one by one.
3.Remove the protection backings up to 3" to insert to the main unit 。CAUTION:DO NOT REMOVE THE PROTECTION BACKINGS TOO MUCH!
4.Insert both elements into the main unit. CAUTION:BEFORE INSERTING THE ELEMENTS,CHECK THE LEFT AND RIGHT ELEMENTS POSITION!
5.Adhere main unit first,then adhere elements,CAUTION:YOU SHOULD REMOVE tHE PROTECTION BACKINGS VERY SLOWLY WHILE APPLYING TO ADHERE ELEMENTS!