Car Reverse Camera Input Cable Adapter For Toyota 20-Pin GEN5/GEN6 Head Unit Infotainment (TNS510/B9013/B9012)

Features：
(1) This cable allows you to connect rear view cameras in Toyota cars with MFD GEN5 and GEN6 multifunctional displays.
(2) The image from the rear view camera will be automatically activated when you shift to reverse gear. 
(3) Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
(4) Only supports NTSC Cameras. 

*Note:
Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input 
will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6V output voltage
of the monitor may be used. If the camera requires more than +6V it should be connected to the ACC line.

Your Toyota will need to have one of the following head units:
TNS510 [Generation 5]
B9030 [Generation 5]
B9013 [Generation 5]
B9012 [Generation 6]
B9018 [Generation 6]
B9028 [Generation 6]
B9016 [Generation 6]
B9019 [Generation 6]
B9017 [Generation 6]
B9020 [Generation 6]
B9029 [Generation 6]
------------------------------------
Vehicle fitment (guide only):
For Toyota Auris (2006-2014)
For Toyota Avensis (2006-2011)
For Toyota Camry (2009-2011)
For Toyota Corolla (2009-2010)
For Toyota Corolla Verso (2009-2022)
For Toyota Hiace (2009-2022)
For Toyota Highlander (2009-2012)
For Toyota Hilux (2006-2011)
For Toyota iQ (2008-2022)
For Toyota Land Cruiser C150 (2009-2013)
For Toyota Prius (2009-2012)
For Toyota RAV4 (2008-2013)
For Toyota Urban Cruiser (2009-2022)
For Toyota Verso (2009-2012)
For Toyota Verso S (2006-2011)
For Toyota Yaris (2006-2011)